How to Winterize a Lawn Mower With Easy Methods & Do it Yourself and Save Your Money

How to winterize a lawn mower, it is a critical care that should be done before entering the winter. How to winterize a lawn mower is more of an art than a science. Some lawn mower care experts are willing to spend the time and effort to teach you how to winterize a lawn mower. Others have been around long enough to know that winterizing a lawn mower is simply a matter of getting used to the various steps involved and then practice on a few lawns first. Of course, if you have never winterized a lawn before, it would be wise to consult with a lawn care professional. Here are some necessary steps in learning how to winterize a lawn mower.

Removing Parts for Winterize a Lawn Mower

Before starting, remove the lawn mower spark plug, filters, and oil tank from your lawn mower. Set aside approximately one hours for the preparation steps. Your engine should be cold when you remove these items. Be sure to remove all exterior trim, including the plastic ground cover, the deck, and most any plastic protective lining that protects the spark plug or combustion chamber.

Connect your lawn mower’s spark plugs and rear end with a wrench. You will need to remove the choke tube located inside the combustion chamber, but you may also need to disconnect the lawn mower fuel line, which a trained mechanic should again do. If you are not confident about removing the spark plug or disconnecting the lawn mower fuel line, do not attempt to do so yourself. Remove the lawn mower screws and disconnect the fuel line from the carburetor. Please do not put the lawn mower carburetor or its accessories in the trash or disposal unit while working on the lawn mower.

Final Step of Winterize a Lawn Mower

Next, remove the old lawn mower filter and its components, including the air filter and the spark plug. After you have thoroughly removed all of these items, replace them in the reverse order (i.e., the air filter goes back on top of the combustion chamber after it is removed). Then, install the new one (replacing the air filter with the new one) and replace the screw under the cap. Finally, clean any debris off the carburetor and its hoses using a compressed air hose. Finally, attach the carburetor to its brackets and secure it with the bolts and screws provided.

Inspect your mower after you winterize a lawn mower. Before starting your mowing session, inspect your fuel filter and air filter condition. Both items should be clean and look in good repair. If you find signs of corrosion, discoloration, or rust, replace them as soon as possible. If the air filter or the spark plug is damaged or dirty, scrape it clean with an automotive scratch remover device (available at automotive supply stores or online resources).

Visual steps for How to Winterize a Lawn Mower:

   

FAQ

To winterize a lawn mower engine, you need to change the oil, oil filter, spark plugs.

To winterize a riding mower, in addition to changing the oil, oil filter, spark plugs, you need to disconnect the battery.

To winterize a riding mower, in addition to changing the oil, oil filter, spark plugs, you need to disconnect the battery.

To winterize a gas lawn mower, in addition to changing the oil, oil filter, spark plugs, you must completely empty the fuel tank.

No comment